User guide

6-24 Compaq Smart Array 431 Controller User Guide
Figure 6-17. View Configuration list box
Figure 6-17 shows an example of a physical view of a Smart Array 431
Controller in slot 6. Listed below the controller are seven 9.1-GB drives.
This controller has one drive array, named Array A, along with a number
of drives within each array. Array A has an online spare.
NOTE: When viewing the configuration list box, selecting an item—a controller, array,
logical drive, or physical drive—will cause the hard drive tray LEDs to blink. Use this
feature to identify a specific physical drive or to identify the external drives attached to a
controller.
More Information Button
The More Information button, shown in Figure 6-18, is located at the bottom
right side of the screen. Click this button to display a list of the controller,
drive, and array configuration details that are available for the selected items.
Drive View Buttons
This box, shown in Figure 6-18, is located at the bottom left side of the screen.
The Drive View box lets you switch between the logical and physical drive
views. Select the representation you would like to see in the View
Configuration list box.