User guide

Array Configuration Utilities 6-23
■ Help - Use to access online help.
Controller Selection Box
The Controller Selection box is located in the top left corner of the main
configuration screen. When you select this, a drop-down box lists all the
controllers that are installed in the present system. You can select which
controller you would like to view or configure. The highlighted controller is
shown in detail in the View Configuration list box.
Figure 6-16. Controller Selection box
Logical/Physical Configuration View List Box
The Logical/Physical Configuration View list box provides a graphical
representation of all the drives and arrays associated with the selected
controller. Located next to each controller icon is the name of the controller
and the slot in which it is installed.
For each controller, the drive arrays, logical drives, and physical drives
associated with that controller are listed. Use the Drive View buttons located
below the Logical Configuration View list box, to select either the Physical or
Logical view.