User guide

Array Configuration Utilities 6-13
Figure 6-9. Create Logical Drive screen
3. In the upper-left area of this screen, click the Distributed Data Guarding
(RAID 5) button.
4. The Logical Drive Size area shows a graphical representation of the
storage capacity available. To create a single logical drive across this
array, accept the default values. See the section titled “Create Logical
Drive Screen” later in this chapter for a detailed description of this
screen.
5. Click the Done button.
6. Select Array B or the Unused space icon under Array B in the Logical
Configuration View.
7. Repeat steps 3-5 to create a single logical drive or Array B, this time
selecting RAID 1 fault tolerance.