User guide

Array Configuration Utilities 6-5
The Array Configuration Utility, which is located on the SmartStart and
Support Software CD, is a graphics-based application that helps you configure
the Compaq Smart Array 431 Controller. You can use the Array Configuration
Utility to configure the Smart Array 431 Controller initially or to reconfigure
your array controller.
The Array Configuration Utility provides the following configuration benefits:
■ Illustrates the controller configuration in an easy-to-understand
graphical format
■ Provides descriptions of various configuration errors
■ Contains configuration wizards that walk you through the configuration
process
■ Suggests optimal configuration and fault tolerance for unconfigured
controllers
Before You Begin
During a first-time installation and configuration of the Smart Array 431
Controller, you should:
1. Install the Smart Array 431 Controller board.
2. Update the system ROM with System ROMPaq.
3. Run Option ROMPaq to update the controller firmware, option ROM,
and drive firmware.
4. Run the System Configuration Utility to verify the controller order
settings.
5. Decide which fault-tolerance method and array configuration you want
to use.