User guide

Running the System Configuration Utility 5-3
Starting the System
Configuration Utility
To start the System Configuration Utility:
1. Place the Compaq SmartStart and Support Software CD in the server
CD-ROM drive.
or
Place the System Configuration Utility diskette 1 in the server
diskette drive.
2. Reboot the server.
During the boot process, several messages display. Among these will be a
notice that one or more Smart Array 431 Controllers were detected.
3. If prompted, press F1 to resume booting.
4. If you are using the Compaq SmartStart and Support Software CD,
select Run the System Configuration Utility from the main menu
screen.
5. If you are given a choice of Auto Configuration, choose Yes.
The system loads configuration files for all detected devices.
6. In the Configuration Complete screen, be sure to choose Review or
Modify Hardware Settings.
From the next screen, Steps In Configuring Your Computer, select
Step 3: View or Edit Details.
1. The View Or Edit Details screen is where you will set the Smart Array
431 Controller(s) configuration parameters. Scroll to the option slot for
the first Smart Array 431 Controller and set each parameter according to
the information in the next section, “Configuring the Controller.”