User guide

4-8 Compaq Smart Array 431 Controller User Guide
Table 4-2
External SCSI Cables for Compaq Enclosures
Cable Description Option Kit Number Cable Assembly Number
External 6-ft. Offset VHDCI
to Wide SCSI cable
341176-B21 313375-001
External 12-ft.Offset VHDCI to
Wide SCSI cable
341177-B21 313375-002
External 6-ft. Offset VHDCI
to Offset VHDCI SCSI cable
341174-B21 313374-001
External 12-ft.Offset VHDCI
to Offset VHDCI SCSI cable
341175-B21 313374-002
Note: If additional cables are required, Order the Option Kit Number.
IMPORTANT: If you will be replacing an existing Smart Controller with the new Smart
Array 431 Controller without reconfiguring the arrays, it is recommended that all of the
drives are connected exactly as they were on the old controller (port 1 to port 1, controller
1 to controller 1, and so on).
External Cabling Instructions
One SCSI port may be available for connection to external storage devices,
depending on whether or not internal drives are connected to the Smart Array
431 Controller.
1. On the rear of the server, connect the Offset VHDCI SCSI end of the
cable to the Compaq Smart Array 431 Controller.
2. Tighten the screws on the cable.
Hardware installation and external cabling is complete.