User guide

3-6 Compaq Smart Array 431 Controller User Guide
CAUTION: Do not interrupt this cycle. Interrupting the ROM reprogramming will
leave the firmware in an unknown state. If this happens you may not be able to
reprogram the ROM and the Smart Array 431 Controller ROM may have to be
replaced. You will be notified when reprogramming is completed.
8. When Options ROMPaq is finished reprogramming the Smart Array
431 Controller ROM, press Enter if you want to reprogram another
Compaq option. Repeat steps 4 through 7.
9. If you are finished with reprogramming options, press Esc to exit the
ROMPaq Utility.
10. Remove the Options ROMPaq diskette and reboot the server by cycling
the power (cold boot).
The Smart Array 431 Controller ROM has been updated; you can take
advantage of the new or increased capabilities, if any, available with the new
firmware.