User guide

Index 13
software-based drive
mirroring D-21
specifications C-1
supporting multiple
arrays D-4
upgrading from single channel
array controller E-1
Smart Array 431 driver
installation
during Windows installation 7-7
updating 7-8
SmartStart
generating NPFC
diskettes 6-6
SmartStart and Support Software
CD
Array Configuration Utility
running 6-6
creating diskettes from 3-2
description of contents 2-2
identified 2-2
running System Configuration
Utility from 5-2
spare drive
add or configure 6-33
assigning 6-27
description F-3
specifications, Smart Array 431
Controller C-1
SSD
diskettes, accessing Readme
files on 7-3
diskettes, creating 7-2
storage capacity, expanding 2-5
storage systems
List, Compaq External Storage
Systems 4-7
stripe size
defined 6-30
fault tolerance 6-30
symbols in text x
symbols on equipment xi
System Configuration Utility
capabilities 5-1
creating diskette version 5-2
creating diskettes 5-2
starting 5-3
when used 5-1
system modifications, FCC
compliance statement A-3
system ROM, updating 3-1
System ROMPaq
description 3-1
using H-3
tagged command queuing 1-1
technical support xii
online 6-7
telephone numbers xii
terminating drives 2-4, H-2
termination
ProLiant Storage systems 4-4
SCSI 4-3, C-2
SCSI bus 4-3
text conventions ix
text files
DRIVERS.RDM 7-3
READ1ST.RDM 7-3
reading 7-3
STORAGE.RDM 7-3
toe straps, using B-2
unrecoverable disk errors, during
automatic data recovery F-5
updating the ROM 3-1
upgrading controller
ACU E-2
backup drives E-1
board placement E-2
Compaq System Configuration
Utility E-2
normal shutdown E-2