User`s manual

MKP 2000 Remote Control Panel • SIS
™
Operation
MKP 2000 Remote Control Panel • SIS
™
Operation
SIS
™
Operation, cont’d
4-8
X25
= Web page priority 0 = Internal (default on power up)
1 = User
X28
= Executive mode 0 = Administrator mode (panel
unlocked)
1 = User mode
2 = Panel locked
4-9
Command/response table for MKP SIS commands Command ASCII Command Response Additional description
(host to MKP) (MKP to host)
Front panel security lockout (executive mode)
Panel Locked mode 2x Exe2 Lock front panel.
User mode 1x Exe1
Enable only input and output selection from the front panel.
Administrator mode 0x Exe0
Unlock front panel.
View front panel lock status x
X28
Show front panel lock status. For
X28
:
0 = Administrator mode (panel unlocked). 1 = User mode. 2 = Panel locked.
Pass-through (RS-232 port redirect)
Configure redirect mode
Esc
X2
*
X3
*
X4
*
X5
CD
Cpn
X2
• Ccd
X3
,
X4
,
X5
Turn redirect mode on and specify port parameters.
Example:
Esc
1*2*50*10D*CD Cpn01•Ccd00002,00050,00000L
Redirect port 1 to port 2. Wait 500 ms for response.
The “L” or “D” delimiter in value
X5
is case sensitive and must be uppercase.
Disable redirect
Esc
X2
* 0CD Cpn
X2
Ccd00000,00000,00000L
View redirect
Esc
X2
CD
X3
,
X4
,
X5
View redirect mode on/off status.