User`s guide

4-12 User’s Guide
Example 4-4 Show FRU Command
P00>>> show fru
Digital Equipment Corporation
AlphaServer 1200
Console V5.0-2 OpenVMS PALcode V1.19-12, Digital UNIX PALcode V1.21-20
Module Part # Type Rev Name Serial #
System Motherboard 25147-01 0 0000 mthrbrd0 NI72000047
Memory 64 MB DIMM N/A 0 0000 mem0 N/A
Memory 64 MB DIMM N/A 0 0000 mem1 N/A
Memory 64 MB DIMM N/A 0 0000 mem2 N/A
Memory 64 MB DIMM N/A 0 0000 mem3 N/A
CPU (4MB Cache) B3004-DA 3 0000 cpu0 KA705TRVNS
Bridge (IOD0/IOD1) 25147-01 600 0032 iod0/iod1 NI72000047
PCI Motherboard 25147-01 a 0003 saddle0 NI72000047
Bus 0 iod0 (PCI0)
Slot Option Name Type Rev Name
1 PCEB 4828086 0005 pceb0
2 S3 Trio64/Trio32 88115333 0054 vga0
3 DECchip 21041-AA 141011 0011 tulip0
Bus 1 pceb0 (EISA Bridge connected to iod0, slot 1)
Slot Option Name Type Rev Name
Bus 0 iod1 (PCI1)
Slot Option Name Type Rev Name
1 NCR 53C810 11000 0002 ncr0
4 QLogic ISP1020 10201077 0005 isp0
The show fru command displays information for CPU, memory, and PCI. This
information is based on data in the serial control bus EPROM. The syntax is:
show fru