User`s guide

4-8 User’s Guide
4.3 Displaying the System Configuration
Several commands are used to display the system configuration: show config,
show cpu, show device, show fru, show memory, show network, show pal, show
power, and show version.
Example 4-1 Show Config Command
P00>>> show config
Digital Equipment Corporation
AlphaServer 1200
Console V5.0-2 OpenVMS PALcode V1.19-12, DIGITAL UNIX PALcode V1.21-20
Module Type Rev Name
System Motherboard 0 0003 mthrbrd0
Memory 256 MB DIMM 0 0000 mem0
CPU (4MB Cache) 3 0001 cpu0
CPU (4MB Cache) 3 0001 cpu1
Bridge (IOD0/IOD1) 600 0032 iod0/iod1
PCI Motherboard a 0003 saddle0
Bus 0 iod0 (PCI0)
Slot Option Name Type Rev Name
1 PCEB 4828086 0005 pceb0
3 S3 Trio64/Trio32 88115333 0000 vga0
4 DECchip 21140-AA 91011 0012 tulip1
Bus 1 pceb0 (EISA Bridge connected to iod0, slot1)
Slot Option Name Type Rev Name
Bus 0 iod1 (PCI1)
Slot Option Name Type Rev Name
1 NCR 53C810 11000 0002 ncr0
2 DECchip 21040-AA 21011 0023 tulip0
3 ATI Mach64 43541002 0009 vga1
4 PCI-PCI Bridge 11011 0002 pcb0
Bus 2 pcb0 (PCI-PCI Bridge connected to iod1, slot 4)
Slot Option Name Type Rev Name
0 Qlogic ISP1020 10201077 0002 isp0
P00>>>
Continued on next page