Installation guide

NOTE: YOU MUST HAVE INTERNET EXPLORER 8 OR GREATER INSTALLED TO USE THE
DRIVERS LICENSE SCANNER WITH KEEPNTRACK. THIS SCANNER IS ONLY SUPPORTED
ON INTERNET EXPLORER.!
!
Setting up the scanner!
When unpacking, verify that you have received the scanner and scanner base,
manual, installation CD, and a USB cable. If any components are missing, contact
COMPanion Technical Support at 1-800-320-5830 or [e-mail]!
!
Assembly!
The Driver’s License Camera Scanner comes in two parts: the camera box, and the
base that holds the camera box. To assemble the unit, place the base on a flat
surface. Insert the camera box into the base, making sure that the glass panel faces
the rounded edge of the base (Image 1). Please note that the angle of the camera box
is not adjustable.!
!
Image 1#
System Requirements
Windows
Minimum
Windows XP SP2!
(32-bit)!
1 GB Free Hard Drive Space, 1 GB RAM, USB 1.1!
connection !
Internet Explorer 8!
Recommended
Windows 7 or Windows 8 !
(32 or 64 bit)!
20 GB+ Free Hard Drive Space, 2 GB+ RAM, USB
2.0 connection!
Internet Explorer 10
IG0073.5 — V6451 Driver’s License Camera Scanner Page ! of 152