Installation guide

NOTE: DO NOT CONNECT THE SCANNER TO A USB KEYBOARD OR OTHER HUB AS THE
POWER SUPPLIED BY THESE DEVICES IS INSUFFICIENT.!
!
KeepnTrack Configuration!
You will need to enable the ID Scanner for all operators that will be using the ID
Scanner. First, log into KeepnTrack Administration. Under the Manage tab select the
Operators sub-tab and perform a find for one of the operators that will be using the
scanner. Select that user from the results list on the left. Unlock the record and select
the Permissions sub-tab. Expand the Devices area.!
!
KeepnTrack has several settings available which allow you to customize how the ID
scanner performs at your facility. These controls can be modified independently for
each operator as desired (Image 11). !
!
1. ID Scanner is Enabled: This control allows you to hide the SCAN ID button on the
Kiosk.!
2. Show Scanner State Menu in Kiosk: This control allows you to enable the state
issuing ID control at a kiosk.!
3. Default ID Scanner State: This control allows you to select which state is set by
default when scanning ID’s. Auto Detect is the default setting.!
4. Enable ID Scanner Maintenance: This control will display maintenance options to
calibrate or clean the Scanshell 800R and Scanshell 800DX.!
!
Ensure the options titled ID Scanner is Enabled and Enable ID Scanner
Maintenance are selected at this time (Image 11).!
!
Image 11!
!
!
IG0069.3 - V6450 Driver’s License Optical Scanner Page ! of 158