User manual
Table Of Contents
- Introduction
- Installation
- Monitoring the multifunction terminal
- MF Director
- MF Monitor
- Printing
- Analyzing a document
- The Address book
- Fax communication
- SMS communication
- Optical Character Recognition (OCR) program
- 23 -
FRENCH
If you try to add a device when the maximum number of devices has been reached,
a message warns you that you have to delete a device from the list before you can
add another.
Adding a device connected via a USB link
The connection between the PC and the terminal must be via a shielded USB 2.0
cable with a maximum length of 3 meters.
Warning - You are recommended to install Companion Suite Pro on your PC
first before connecting the USB cable to your terminal.
If you connect the USB cable before installing Companion Suite Pro, the
Plug and Play software recognition system automatically recognizes
that a new device has been added. To install the drivers for your
terminal, follow the instructions shown on the screen. A window asking
where the drivers are located may display. If so, specify the installation
CD-ROM.