User manual
Table Of Contents
- Introduction
- Installation
- Monitoring the multifunction terminal
- MF Director
- MF Monitor
- Printing
- Analyzing a document
- The Address book
- Fax communication
- SMS communication
- Optical Character Recognition (OCR) program

- 12 -
MONITORING THE MULTIFUNCTION TERMINAL
The software you have installed contains two applications for managing the
multifunction terminal, MF DIRECTOR and MF MONITOR, which allow you to:
• Check that your multifunction terminal is correctly connected to your PC,
• Gain quick access to image touchup, OCR and fax receive/send software as well as
your device's web pages.
To manage the multifunction terminal, run MF Director by clicking the icon on your
desktop or by selecting
PROGRAMS > COMPANION SUITE > COMPANION SUITE PROLM2
> MF D
IRECTOR from the START menu.
CHECKING THE LINK BETWEEN THE PC
AND THE MULTIFUNCTION TERMINAL
The connection may be checked using the monitor tab which lists all the devices on
which the PC is registered.
• If the line for a device is green, the PC and the device are connected,
• If the line for the device is red, there is no connection between the PC and the device,
• If the line for the device is yellow, the PC is in the process of connecting to the device.