User`s manual
7 The BIOS Setup Program
7.2.1 Accessing the BIOS Setup Program
To access the BIOS Setup program, press the [F2] key as soon as your notebook starts up.
The Phoenix BIOS screen will display.
Phoenix SecureCore(tm) Setup Utility
Main Boot Exit
Item specific Help
System Time: [19:34:35] <Tab>, <Shift-Tab>, or
System Date: [12/29/1995] <Enter> selects fields.
Product Name: XXXXXXXX
Serial Number: XXXXXXXX
XXXXXXXX
System Memory: XXX KB
Extended Memory: XXX MB
BIOS Version: XXX
UUID Number: XXXXXXXX
XXXXXXXX
F1 Help ↑↓ Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit ←→ Select Menu Enter Select 4Sub-Menu F10 Save and Exit
The Menu Bar
The top of the Setup screen has a menu bar with the following selections:
Main Allows the user to specify standard IBM PC AT system parameters.
Boot Allows the user to specify the order in which your notebook is to check
for a device to boot the system.
Exit Allows the user to save CMOS setting and exit Setup.
7-3