User`s manual

5 Peripherals
5.3 Memory Modules
You can add more memory modules to your notebook to improve its performance.
To install a memory module:

 
1. Make sure the computer is turned off.
2. Remove the screw securing the memory module cover.
3. Lift off the memory module cover.
4. There are two memory module ports. The current memory module in your notebook
already occupies the one. Place the new memory module in the second slot, matching
up the notch along its connector rim with the tooth in the connection slot.
5. When the module is secured, please press down gently until it snaps into place.
Depending on how much additional memory you require, you may need to replace
the original memory module.
To remove a memory module:
1. Make sure the computer is turned off.
2. Remove screw securing the memory module cover.
3. Lift off the memory module cover.
4. Pop out both silver latches holding the memory module into place. The module pops
up.
5. Grasp the outer edges of the memory module with the thumb and forefinger, and then
gently remove it.
5-5