Specifications

6. Turn the computer over. Remove two M2.5×9 screws from the base and two M2.5×7
screws from the rear panel.
Figure 5-7: Removing two screws securing the display assembly
7. Turn the computer upright. Open the display so that it is perpendicular to the desk, then
gently lift off the display.
Figure 5-8: Lifting off the display assembly
Disassembling the display assembly
1. Remove two mask seals and two M2.5×7 screws securing the LCD bezel. If disassembling
the 14” display, two M2.5×5 screws must also be removed from the top of the LCD bezel.
Chapter 5-12