Specifications

ACPI CarBus Controller ENE CB1420

• ACPI-PCI Bus Power Management Interface specification Rev 1.1 Compliant

• Supports OnNow LAN wakeup, OnNow Ring Indicate, PCI CLKRUN#, and PME#, AND

CardBus CCLKRUN#

• Compliant with PCI specification v2.2, PC Card Standard 7.0 and JEIDA 4.1

• Yenta

PCI to PCMCIA CardBus Bridge register compatible

• ExCA (Exchangeable Card Architeture) compatible registers mappable in memory and I/O

space

• Intel

82365SL PCIC Register Compatible

• Supports PCMCIA_ATA Specification

• Supports 5V/3.3V PC Cards and 3.3V CardBus cards

• Supports single PC Card or CarBus slot with hot insertion and removal

• Supports multiple FIFOs for PCI/CardBus data transfer

• Supports Direct Memory Access for PC/PCI and PCI/Way on PC Card socket

• Programmable interrupt protocol: PCI, PCI+ISA, PCI/Way or PC/PCI interrupt signaling

modes

• Win’98 IRQ and PC-98/99 compliant

• D3

cold

state PME# wakeup support

• 3.3Vaux Power Support

• Integrated PC 98-Subsystem Vendor ID support, with auto lock bit

Floppy Disk Drive

• 3.5"1.44MB, 3 mode as an I/O module

Hard Disk Drive

• 2.5" up to 40 GB, 9.5mm height

CD-ROM Module

• 12.7mm height module

• CD-ROM, DVD, CDRW,COMBO

• 24X CD_ROM

Audio Port

MIC IN

• AC-coupled input,100mVP-P maximum

Line out

• 1V

P-P

Built-in Microphone

• Sensitivity-45dB

• S/N:58dB

Built-in Speakers

• 8Ω, 1W (resonant frequency 460HZ) speakerX2

Built-in Speakers

• 8Ω, 1W (resonant frequency 460HZ) speakerX2

Chapter 1-6