Specifications

Chapter 2-14
System Setup
Invoking setup
The setup function can only be invoked by pressing F2 when ″ Press <F2> to enter Setup ″
message is prompted on the bottom of screen during POST.
The setup uses a menu driven interface to allow the user to configure their system. The
features are divided into 6 parts as follows:
Main Allows the user to specify standard IBM PC AT system parameters.
System Devices Provides advanced settings of the system.
Security Provides security settings of the system.
Boot Allows the user to specify the boot options.
Info. Display the system informations.
Exit Allows the user to save CMOS setting and exit Setup.
During setup, all Fn function keys and power saving functions are disabled.
Setup screens
Main Menu
PhoenixBIOS Setup Utility
Main System Devices Security Boot Info. Exit
Item specific Help
System Time: [09:00:00]
System Date: [01/01/2002] <Tab>, <Shift-Tab>, or
Floppy Disk Drive 1.44 MB Floppy disk size
Internal Hard Disk: [ xxxxx MB] Disk Size
ATAPI Device : [ Model Name]
Boot Display Device: [Both]
Screen Expansion: [Enabled]
Television Type: [NTSC] Select NTSL or PAL standard
VGA Memory: [32MB] VGA Memory Size Configuration
F1 Help ↑↓ Select Item F5/F6 Change Values F9 Setup defaults
Esc Exit ←→ Select Menu Enter Select4Sub-Menu F10 Save and Exit
System Time and System Date
The hours is displayed with 24 hour format. The values set in these two fields take effect
immediately.
Floppy Disk Drive