User's Manual

 Hibernate Mode
In Hibernate mode, power is conserved by system data
being copied to the hard drive, and your notebook
completely turning off. When Hibernate mode is exited,
your notebook will return to the same operating state it was
in before entering hibernate mode.
Hibernate Mode can be enabled/disabled in the Power
Options Properties window.
If enabled, your notebook will go into hibernate mode if the
battery charge level becomes critically low.
Depending on how you set the Power Management
Options on the Advanced tab in the Power Options
Properties window, use one of the following methods to
enter hibernate mode:
• When you close the lid of your notebook
• When you press the power button
• Start > Turn Off Computer > Hibernate (if the
Hibernate option does not show, press Shift, and the
Standby option will switch to Hibernate).
If the Hibernate option is not available for these methods,
Hibernate mode has not been enabled. Check the
Enable Hibernation box on the Hibernate tab of the
Power Options Properties window and click Apply to
enable Hibernation.