User's Manual

4.1.3 Installing PC Cards
PC Cards may be 'hot-swapped', which means you can
install a card while your notebook is running. The card will
be detected automatically.
Usually PC Cards have a mark or symbol to show which
end to insert into the slot. Cards are keyed to prevent
incorrect insertion. Check the documents that came with
your card if the orientation is unclear.
1. Hold the card with its orientation symbol pointing into
the slot and the topside of the card facing up. The
push-button latch may need to be in before inserting
the card.
2. Slide the card into the slot until it clicks into the
connector.
3. If you encounter too much resistance, do not force the
card. Check the card orientation and try again.
Your notebook will recognize most PC Cards and
automatically load the appropriate device driver. If the
configuration program tells you to load the manufacturer's
drivers, use the floppy disk or CD that came with the PC
Card.