User's Manual

3.2.3 Setting a Password
To provide extra protection for your data and documents, it
is advisable to set a password.
As your notebook is booting (starting up), press F2 to take
you to the BIOS Setup Utility. Use the right arrow key to
highlight Security.
Use the down arrow key to select: Set Supervisor
Password… [Enter]. Press Enter.
Type your password, press Enter and re-type to confirm.
Press Enter. Your changes will be saved. Press Enter to
continue.
To enable password protection, use the down key to select
Password Required to Boot. Press Enter. To turn on
password protection, use the down key to select Enabled;
to turn password protection off, select Disabled. Press
Enter.
Use the right arrow key to select Exit. Your notebook will
now boot as normal.