User's Manual

30
- Enter the password.
- Choose “Never”, “Power up” or “Always” and press “OK (
‥
)” to set.
Notes 1) “Never” – the phone is unlocked.
“Power up” – the phone is locked automatically when it is turned on.
“Always” – you must unlock the phone to place outgoing calls.
Note 2) Or you can simply lock your phone by pressing and holding “#” on standby mode.
It is same as “Always” option. To release Lock mode, press and hold “#” and enter 4
digits of password.
b. New Password
To change the password,
- Press “MENU (
‥
)”, “9. Settings”, “5. Security” and “2. New Password”.
- Enter the password.
- Enter the new password and press “OK (‥)”.
- Then you can see “RE-ENTER NEWCODE” on top of the display.
- Enter the new password again and press “OK (
‥
)” to save.
c. Memory Clear
The Memory Clear option allows you to clear the call list, schedules, and all other stored
information from memory.
- Press “MENU (
‥
)”, “9. Settings”, “5. Security” and “3. Memory Clear”.
- Enter the password.
- Choose “1. Call list”, “2. PhoneBook”, “3. Schedule”, “4. Memo”, “5. Alarm” or “6.
All”.
- Choose “Clear” and press “OK (
‥
)” to erase the memory.
d. Privacy Info
To stop disclosing private information to other people, set the phone to show the
information only when the correct PIN has been entered. To set privacy information:
- Press “MENU (‥)”, “9. Settings”, “5. Security” and “5. Privacy Info”.
- Enter the password.
- Choose “1. Phonebook”, “2. Schedule/Memo”, “3. Message”, “4. Call List”,
“Camera” .
- Choose between “On” and “Off” and press “OK (‥)” to set.
X. Help