User's Manual

32
VI. SECURITY FUNCTION
Your phone provides many security options, including a user -programmable lock code and call
restriction features. To access the Security menu in Standby mode, press Menu () and 6.
Security. And enter the four-digit password.
Note : The password is 0000 if you dont have your phone number yet. Or the last 4 digits of
your number if you already have you phone number. If you want to change the password, see
below;
1. Phone Lock
Locking the phone limits all outgoing calls except calls to the three hard-coded emergency
numbers (119 / 110 / 112).
You can lock the phone manually during use, or set the phone to lock automatically when it is
turned on. When the phone is in Lock mode, you can answer incoming calls, but you mus t
unlock the phone to place outgoing calls (except to emergency).
- Press Menu (), to fine 6. Security and choose 1. Lock Mode.
- Enter the password.
- Choose never , on power upor now and press OK () to set.
Notes 1) never the phone is unlocked.
on power up the phone is locked automatically when it is turned on.
now you must unlock the phone to place outgoing calls.
Note 2) Or you can simply lock your phone by pressing and holding # on standby mode. It is
same as now option. To release Lock mode, press and hold # again.
2. Changing Password
If you want to change the password,
- Press Menu (), to fine 6. Security and choose 2. New Password.
- Enter the password.
- Enter the new password and press OK ().
- Then you can see RE-ENTER NEWCODE on top of the display.