User's Manual

29
V. SECURITY FUNCTION
Your phone provides many security options, including a user -programmable lock code and call
restric tion features. To access the Security Menu in Standby Mode, press “Menu ( )” and “5.
Security” and enter the four-digit password.
Note: The password is “0000” if you don’t have your phone number yet or the last 4 digits of
your number if you already have your phone number. If you want to change the password, see
“Changing Password” on page .
1. Phone Lock
If you lock the phone, it limits all outgoing calls except calls to the three hard-coded emergency
numbers.
You can lock the phone manually or set the phone to lock automatically when it is turned on.
When the phone is in Lock Mode, you can answer incoming calls, but you must unlock the
phone to place the outgoing calls (except to emergency numbers).
- Press “Menu ( )” and “5. Security” and enter the password.
- Press “1. Phone Lock”.
- Select “never ”, “on power up” or “now” and press “OK ( )” to set.
Notes 1) “Now” – You must unlock the phone to place outgoing calls.
“On Power Up” – The phone is locked automatically when it is turned on.
“Never ” – The phone is unlocked.
Note 2) You can simply lock your keypad by pressing and holding “#” on Standby Mode.
2. Changing Password
If you want to change the password:
- Press “Menu ( )” and “5. Security” and enter the password.
- Press “2. Password” and enter the new 4-digit password.
- Press “OK ()”, then you can see “RE-ENTER NEW CODE _ _ _ _”.
- Enter the new password again and press “OK ( )” to set.
3. Restrict Sending Calls
“Send Restrict” allows you to set your phone to restrict outgoing calls.
- Press “Menu ( )” and “5. Security” and enter the password.
- Press “3. Send Restrict”.