User's Manual

13
BASIC FUNCTIONS
1. Making a Call.
In standby mode, enter the phone number (up to 32 digits) by pressing the digit keys. The phone
number is displayed from left to right. Press “SEND”. The phone places the call to the entered
phone number (if service is available).
2. Ending a Call.
To end a call, press “END/ ”. The call time (length of the call) will be displayed along with the
name or number of the called party (if available). The phone returns to Standby Mode
automatically.
3. Answering a Call.
To answer an incoming call, press any key if “Any Key Answer ” is set. (Please refer to “6. Any
Key Answer” in “III. Phone Setting”. If your phone is registered in Caller ID, a caller’s phone
number will be displayed on screen. If caller ’s number is stored in Phone Book, the caller ’s
name will be displayed.
4. Correcting Dialing Mistakes.
To correct a misdialed digit, press “CLR” to erase one digit at a time. You can erase all the
digits at once by pressing “CLR” and holding it down for at least one second.
5. Storing Phone Numbers
Phone numbers for frequently used services are pre-programmed into your phone. To store a
number,
- Enter a phone number and press “STO ( )”. Or in standby mode, press “Menu ( )” ,
“1. Phone Book” and “3. Phone # Store”.
- Enter the location number you want to store in.
- Press “” and enter the name.
- Press “” and enter the phone number.
- Press “” and scroll “” or “(*)” / “(#)” to choose Group type.
- Press “Sto ( )” to store.