User's Manual

33
- Press “SMS (
…
)” and “2. Send MSG”. Then old message lists appear on the display
below “New Send MSG”.
- Select “New Send MSG” or old messages. And write a new message or edit old
messages.
- Once you finish to write a message, press “OK (

)”.
- Select “New Send NUM” for a new number or the other phone numbers you have
sent before.
- If you choose “New Send NUM”, enter the dial number and press “OK ()”.
- Enter the receive number, which you wish a receiver to call to, and press “OK (

)”.
(There is your phone number displayed for the receive number)
- Then your phone displays that a message is being sent.
Deleting Messages
You can delete a message one by one or delete all messages at once. To delete a message;
- Press “DEL (…)” key while you are reading a message or on the message list display.
- Or press “SMS (
…
)” and “4. Erase All”. Then “Erase ?” appears on the display. Press
“OK ()” to erase all messages.
Note ) If you use “Erase All” option, it also erases voice mails.
II. Voice Mail Service
Your phone can receive voice mail notification when it is turned ON. If your service provider
transmits the notification and your phone is turned OFF, you will receive notification the next
time you turn your phone ON.
If your phone is turned when it receives a voice mail notice, your phone sounds an alert or
vibrates and
is shown on the display. Once you listen a new voice message, disappears
on the display.
Listening Voice Mails
If your phone is turned ON when it receives a voice message, your phone sounds an alert or
vibrates and
is shown on the display. You have a choice of listening the message
immediately by pressing “SMS (…)” key or listening it later. To listen a new voice message;
- Press “SMS (…)” and “1. View MSG”.
- Select “

1 Voice” and press “SEL (

)”. Then the time you received, a sender and