User's Manual

23
IV. SECURITY FUNCTION
Your phone provides many security options, including a user-programmable lock code and call
restriction features. To access the Security menu in Standby mode, press “Menu ()” and “4.
Security”. And enter the four-digit password.
Note : The password is “0000” if you don’t have your phone number yet. Or the last 4 digits of
your number if you already have you phone number. If you want to change the password, see
“New Password” on page .
Auto Lock
Locking the phone limits all outgoing calls except calls to the three hard-coded emergency
numbers (911).
You can lock the phone manually during use, or set the phone to lock automatically when it is
turned on. When the phone is in Lock mode, you can answer incoming calls, but you must
unlock the phone to place outgoing calls (except to emergency).
- Press “Menu ()” and “4. Security” and enter the password.
- Press “1. Auto Lock”.
- Select “SET AUTO LOCK” as “never”, “always” or “on power up”.
- Press “OK (

)” to set.
Notes 1) “always” – you must unlock the phone to place outgoing calls.
“on power up” – the phone is locked automatically when it is turned on.
“never” – the phone is unlocked.
Note 2) Or you can simply lock your phone by pressing and holding “#” on standby mode. It is
same as “always” option.
New Password
If you want to change the password,
- Press “Menu ()” and “4. Security” and enter the password.
- Press “2. New Password” and enter the new 4-digit password.
- Press “OK ()”, then you can see “CONFIRM NEW PASSWORD”.
- Enter the new password again and press “OK ()” to set.
Restrict