User's Manual

13
BASIC FUNCTIONS
Making a Call.
To place a call :
Press and hold “END/
” to power on your phone. If you see indicators on the display that
means the phone is on.
Enter the phone number (up to 32 digits) by pressing the digit keys. The phone number displays
from left to right.
Press “SEND”. The phone places the call to the entered phone number (if service is available).
You can also make calls ;
From your Phone Book (see “V. Phone Book.” on page )
From your Call Stack list (see “Using Caller ID” on page )
By using One-, Two-, or Three-Touch Dialing (see “Speed Dialing” on page ).
Ending a Call.
To end a call, close the flip or press “END/
”. The call time (length of the call) displays, along
with the name and number of the called party (if available). The phone returns to Standby mode
automatically.
Answering a Call.
To answer an incoming call, open the flip or also press any key. If your phone is registered in
Caller ID, a caller’s phone number is displayed on the display. If a caller’s number is stored in
Phone Book, the caller’s name is displayed.
Correcting Dialing Mistakes.
To correct a misdialed digit, press “CLR” to erase one digit at a time. You can erase all the
digits at once by pressing “CLR” and holding it down for at least one second.
Storing Phone Numbers
Phone numbers for frequently used services are pre-programmed into your phone. To store a
number,