User's Manual

Basic Operation
38
. There are five options for you to operate: “View”,
“Delete”, “Save to Phonebook”, “Dial” and “Edit”.
Quick Dial
You may quickly search and dial a phone number stored in SIM
card after inputting the number address (SIM Card memory
address: 1~250) and pressing
to get the symbol “ # ”
displaying on the screen. Then, press
to dial a call.
Notice that the handset memory (NVM) doesn’t support such
function.
Holding a Call
Press to put the on-line call on hold while you make
another call. When the second call is connected, pressing
allows you to switch between these two calls.
Multiparty Calls
The multiparty service provides you with the ability to have a
simultaneous conversation with more than one caller, if your
network service provider supports this feature.
A multiparty call can only be set when you have one active call
and one call on hold, both calls having been answered. Once a
multiparty call is set up, calls may be added, disconnected or
separated (that is, removed from the multiparty call but still
connected to you) by the person who set up the multiparty call.
The maximum callers in a multiparty call are six. Once started,
you are in control of the multiparty call, and only you can add
calls to the multiparty. More to the point, this system allows a
maximum of 6-party call.
Multiparty calls feature several functions including “Swap”,
“Conference”, “Transfer”, “End Single”, “Phone book”, “SMS”,
“Sound Recorder”, “Mute”, and ‘DTMF”. Here we briefly