User Manual

Menu Function

In snap shoot mode, press once more to access camera

settings.

1. Set Shot Mode

In this menu, you can choose and adjust the following settings:

 Shot mode

Aside from normal mode, frame mode, continuous mode, and

twice shot, are also supported in set shot mode. When you

activate twice shot function, two pictures taken sequentially will be

integrated into one picture.

Important! : Twice shot and continuous mode

cannot mutually support each other for their

different functional attributes and shot

modes. Moreover, only images sized by 128

x 143 can be selected in frame mode and

continuous mode, and add date and add

text as well.

 Size

Here you can pick picture size of largest (640 x 480 pixels), large

(320 x 240 pixels), normal (128 x 143 pixels) and small (64 x72

pixels), the default is set to normal. The smaller the image size is,

the less storage is required; hence more pictures can be taken.

Please note that the screen supports normal size. When the image

size is 64 x 72, 320 x 240 or 640 x 480, the screen display of the

image will not be shown, as it should be. Only normal size can

meet the screen display.

 Continuous time

Designed to support continuous mode only, this function allows

you to take four types of continuous shoots. You can set the shot

interval in between each shoot to 0.5 seconds, 1 second and 1.5

seconds, then press

to enable it. When starting this function,

you can see the indicator

displaying on the top left corner of

the screen. Press

to take the pictures, after all four pictures