User Manual

Basic Operation
30
be disconnected from the phone and electrical outlet.
3. Use only chargers certified by the original mobile phone
manufacturer. This is an international charger (Model:
KWS05C is subject to change in different countries). Read
instructions on the charger label before use.
4. A ‘battery low’ message will be displayed on the screen to
alert you of battery low condition. The mobile phone will
automatically shut down when the battery is exceptionally
low.
5. If the battery is totally out of power, the battery requires to be
recharged at least ten minutes. Otherwise, it might have
difficulty to turn on.
Turning on the Phone
To turn the phone on, hold the key for about 2~3
seconds. If the message “Enter PIN:” shows on the screen, the
preset “PIN:” code of the SIM card must be keyed in (please
refer to the Manual provided by the telecommunication
company for details). Then, press the
key.
PIN and PIN2 (4 to 8 digits)
A PIN (Personal Identification Number) code is stored in your
SIM card and is supplied by your SIM card network provider.
To prevent unauthorized use, your PIN1 code will be required
every time while you turn on your phone. Key-in the correct
PIN1 code and press
.
Important! :
1. If a wrong PIN code is entered three
consecutive times, the phone becomes
locked or disabled. You must ask for your
network provider to use the PUK code to
unlock or enable the phone again.
2. PIN2 code is for other functions, such as
certain number dialing and barring.