User's Manual

User’s Manual 5-3
Optional Functions
7. When finished, tap OK. The progress bar is displayed during the
backup process. When the backup is completed, the backup finish
message appears. The backup time that is displayed on screen is the
time that the backup was started.
8. Tap OK to return to the previous screen.
9. Tap Exit to close the DataBackup screen.
Carrying Out the Restore Operation
To restore is to overwrite the backed up data from the storage device onto
the main memory of your Toshiba Pocket PC e830. Prior to restoring your
data, please consider the following:
■ If the same file name exists in the main memory of your Toshiba Pocket
PC e830, this file data is replaced with the backup data from the storage
device.
■ If files exist in the main memory but not in the backup file, they will not
be overwritten.
1. To restore from the CF/SD card, insert the CF/SD card that contains the
backup data into your Toshiba Pocket PC e830.
2. Tap Start, Programs, and then DataBackup to display the DataBackup
screen shown on the following page
.
The backup process will stop if the storage device becomes full before
completing the backup. Before starting the backup, check the remaining
storage device capacity.
If the storage card is write-protected, you cannot save the backup data.
Cancel the write-protection before starting the backup.
Backups can also be made periodically. For more information, see “Making
an Auto Backup” on page 5-5.
Backup files are always overwritten.
Pocket PC e830 UG.book Page 3 Monday, September 22, 2003 10:57 AM