User's Manual

2. Tap Connect.
NOTE When call is not idle, your current status becomes Busy.
Calling a phone using telephone directory
To call a phone using telephone directory:
1. Tap Phone.
2. Tap Telephone Directory.
3. Tap a contact on your telephone directory.
4. Tap Connect.
86
Chapter 2: Basic Skills
Answering a call
To answer a call while hearing a phone ring, tap Call.
NOTE When call is not idle, your current status becomes Busy.
Answering a call automatically
Toshiba IP Phone can answer a call automatically after answering timer
has expired. You can configure whether you activate this function or
not.
When you activate this function, you can also customize the value of
answering timer. The default value of answering timer is 10 (seconds).
The length of answering message is less than or equal to 20 seconds.
You can configure answering message on the condition shown in
"Answering message audio file" on page 96.
Your calling party can record their voice message after hearing
answering
message. The length of recorded message is less than or equal to 20
seconds.
87
Toshiba Pocket PC e800/e805 User’s Guide
Holding a call
To hold a call, tap Hold. Once the call is on hold, the Hold button
turns
into a Talk button. While holding a call shown below, if you tap Talk,
you
can talk again.
Hanging up
To hang up, tap Hang up.
Redialing using outgoing call history
You can redial using outgoing call history. You can configure the number