User's Manual

4. Tap Start. The screen for confirming that other applications have
ended appears.
5. To display the Backup password input screen, tap OK.
6. Enter a password. You can enter a password up to a maximum of 16
characters. Backup can be made even without entry of a password.
If a password is entered, that password is required at the time of
restore.
186
Chapter 9: Optional Functions
NOTE If you forget the password, you cannot restore the
backup data. Do not forget your password. Write down
the password and keep it in a safe place where only you
know.
7. When finished, tap OK. The progress bar is displayed during the
backup process. When the backup is completed, the backup finish
message appears. The backup time that is displayed on screen is
the time that the backup was started.
8. Tap OK to return to the previous screen.
9. Tap Exit to close the DataBackup screen.
NOTE The backup process will stop if the storage device
becomes full before completing the backup. Before starting
the backup, check the remaining storage device
capacity.
If the storage card is write-protected, you cannot save the
backup data. Cancel the write-protection before starting
the backup.
Backups can also be made periodically. For more information,
see "Making an Auto Backup" on page 189.
Backup files are always overwritten.
Carrying Out the Restore Operation
To restore is to overwrite the backed up data from the storage device
onto
the main memory of your Toshiba Pocket PC e800/e805. Prior to restoring
your data, please consider the following:
?If the same file name exists in the main memory of your Toshiba
Pocket PC e800/e805, this file data is replaced with the backup data
from the storage device.
?If files exist in the main memory but not in the backup file, they