User's Manual

hold
a network that you want to connect and select "Connect" from menu.
To delete network listed in preferred network, Tap and hold a network
that
you want to delete and select "Remove Settings" from menu.
NOTICE:
If you select to automatically connect to non-preferred networks, your
device will detect any new networks, your device will detect any new
networks
and provide you the opportunity to configure them.
Configure Wireless Network
A wireless network can be added either when the network is detected,
or
manually by entering settings information.
?Network name: It is also know as "SSID" and "ESSID". Enter a network
name, network name is a name given to the groups that form the
wireless LAN network, and up to 32 single-byte English characters
and symbols may be used. If the network was detected, the network
name is automatically entered and can't be changed.
?Connect to: Select what your network connects to, Work or Internet.
?This is a device-to-computer (ad hoc) connection: To connect to
an ad hoc connection, select this.
152
Chapter 8: Wi-Fi (IEEE 802.11b) Wireless LAN
Configure Network Authentication Screen
A wireless network can be added either when the network is detected,
or
manually by entering settings information. To determine if
authentication
Information is needed see your network administrator.
Check here to set WEP (Wired Equivalent
Privacy).Default is “Disable?
Check here to enable shared authentication
(Shared mode). Default is “Disable?
Check here if you can obtain WEP key
automatically from Access Point.
Almost case Default is “Enable?
In “Key?you enter the ASCII characters and