User's Manual

and make sure you can use the ActiveSync to receive and send e-mail successfully. For

corporate e-mail received and sent, please check with your network administrator for

necessary connection settings.

(2) Make sure you have entered the IP address of the host computer as the WINS server on your

Pocket PC.

(3) Reset your Pocket PC to make the TCP/IP settings take effect and execute the ActiveSync

function in Pocket PC to enjoy the high speed ActiveSync Wirelessly to receive and send e-

mail.

D. Settings

D1. What is SSID? What should I set in the SSID field?

SSID stands for Service Set Identification, which is the ID to form the Wireless Network. You

can set up to 32 characters in the SSID field. For the Infrastructure Mode, you should set the

SSID the same as the Access Point been connected with. To create a 802.11 Ad Hoc Network,

the SSID must be the same among stations to enable the wireless communication within the

local area network.

Note!

You need to choose a proper SSID and channel for the first 802.11 Ad Hoc station. For other

stations want to join the same SSID group, you could only choose the same SSID as the first

station, but the channel will not take effect. The 802.11 Ad Hoc must enter the proper SSID.

Blank SSID for the 802.11 Ad Hoc Mode is not allowed. The stations want to join the 802.11

Ad Hoc Network must have the same SSID and are suggested to have the same IP Address in

the Network group.

D2. Why can't I choose the "Channel" and "Country" field in "Infrastructure" Mode?

For the Infrastructure Mode, the Country and Channel are decided by the Access Point. You can

only join the existing Access Point formed Wireless Network but not create a new Wireless

Network. That is the reason why you can't set the "Channel" and "Country" settings.

D3. When should I set the IP address, Subnet mask and Default gateway settings?

When the Wireless Network does not have the DHCP server, you should set your own IP

address, Submask and Default gateway for Wireless Network connection. Otherwise, the OS

might set the different Network group IP address for you, which will cause the disconnection

for the Wireless Network.

D4. How can I set the IP address, Subnet mask and Default gateway settings?

Simply click Start→Settings→Connections→Network adapter→IEEE802.11b WLAN Adapter

→Properties→IP Address to set IP address, Subnet mask and Default gateway settings.