User's Manual

FRONT PANEL CONTROL

• Power Key:

Press this knob to switch ON/OFF of monitor’ s power.

• MENU/ENTER:

Activate OSD menu or function adjusts confirmation.

• Contrast

/ :

Adjust contrast or function adjustment.

• Brightness

/ :

Adjust brightness or function adjustment.

• Auto Config Key / EXIT:

1. When OSD menu is in active status, this knob will act as EXIT-KEY

(EXIT OSD menu)

2. When OSD menu is in off status, press this knob over 2 seconds to be

in Auto Adjustment function.

The Auto Adjustment function is used to set the HPos, VPos, Clock and

Focus automatically.

NOTES

• Do not install the monitor in a location near heat sources such as radiators

or air ducts, or in a place subject to direct sunlight, or excessive dust or

mechanical vibration or shock.

• Save the original shipping carton and packing materials, as they will come

in handy if you ever have to ship your monitor.

• For maximum protection, repackage your monitor as it was originally

packed at the factory.

• To keep the monitor looking new, periodically clean it with a soft cloth.

Stubborn stains may be removed with a cloth lightly dampened with a mild

detergent solution. Never use strong solvents such as thinner, benzene, or

abrasive cleaners, since these will damage the cabinet. As a safety

precaution, always unplug the monitor before cleaning it.