User's Manual

5
INSTALLATION INSTRUCTIONS
Power Source:
This LCD monitor has a universal power supply that allows operation in either
100/120V AC or 220/240V AC voltage area (No user adjustment is required.)
CONTROLS AND CONNECTORS
VIDEO CABLE
Connecting the Video Cable: the LCD monitor comes with a built-in video
cable. Plug the signal cable′s 15-pin connector into the computer's video port
and tighten the two screws on the cable connector.
Caution: If the AC outlet is not grounded, install the proper grounding
adapter (not supplied).
Figure 1 Connecting Cables
1 AC inlet 2 Signal Cable