CAXA0 Rugged Tablet User Manual
TABLE OF CONTENTS Safety Precautions and Usage Notes ......................................................... 2 Regulatory Information ................................................................................ 5 Directive 2014/53/EU ............................................................................................. 6 Your Tablet .................................................................................................... 9 Package Contents ...........................................
CAXA0 Rugged Tablet User Manual Safety Precautions and Usage Notes To reduce the risk of injury, loss of life, electric shock, fire, malfunction, and damage to equipment or property, always observe the following safety guidelines: DANGER: Precautions on the Battery: Failure to comply with the following precautions may result in electrolyte leakage, generation of heat, ignition or rupture. Avoid placing the battery in extreme heat (for example near fire or in direct sunlight).
Safety Precautions and Usage Notes DO NOT expose bare skin to this product when handing this unit in extreme hot or cold environments. CAUTION: When using in a hot or cold environment, some peripherals and battery packs may fail to work properly. Check the operation environment of the peripherals before operating the product. Using this product continuously in a hot environment will shorten the product life. Avoid use in these types of environments.
CAXA0 Rugged Tablet User Manual Camera Notes： The camera's autofocus function may not perform as expected in the following circumstances. The subject is very dark. The subject lacks contrast (e.g. the sky, a white wall, etc.) or there is little contrast between the subject and the surroundings (e.g. the subject is standing in front of a white wall while wearing a white shirt). Objects of sharply differing brightness are included in the scene (e.g.
Regulatory Information Regulatory Information CAUTION: Do not operate this personal computer or handheld computer’s incorporated wireless WAN modem in the presence of flammable gases or fumes. Switch off the cellular terminal when you are near petrol stations, fuel depots, chemical plants or where blasting operations are in progress. Operation of any electrical equipment in potentially explosive atmospheres can constitute a safety hazard.
CAXA0 Rugged Tablet User Manual Directive 2014/53/EU Technology WLAN 802.11b/g/n WLAN 802.11a/n/ac WLAN 802.11a/n/ac Bluetooth BR/EDR/LE NFC GPS GLONASS WLAN & Bluetooth Combo Module GPS NFC Frequency band [MHz] 2400-2483.5 5150-5725 5725-5875 2400-2483.5 13.56 1575.42 1602MHz + n * 0.5625 MHz ("n" is a satellite's frequency channel number from -7 ~6) Maximum transmit power [dBm] (less than) 20 23 13.98 10 -38.
Regulatory Information The radio wave exposure guidelines use a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit for mobile devices is 2W/kg. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. The highest SAR values under the ICNIRP guidelines for your device are listed at the end of this page.
CAXA0 Rugged Tablet User Manual Compal Electronics, Inc. No. 581, Ruiguang Rd., Neihu District, Taipei City 11492, Taiwan, R.O.C Declaration of Conformity We, Compal Electronics, Inc., Address: No. 581, Ruiguang Rd., Neihu District, Taipei City 11492, Taiwan, R.O.C. declare under our sole responsibility that the below mentioned radio equipment type is in compliance with Directive 2014/53/EU.
CAXA0 Rugged Tablet User Manual Your Tablet Package Contents Ensure that all of the proper items are included with the tablet in the packaging.
Your Tablet Tablet Overview Front View The following illustration shows the front side of the system. Number Component 1 Front-Facing Camera (2MP) Captures images and videos. 2 Ambient Light Sensor Senses the ambient light in order to make adjustments to the brightness of the display. 3 Microphone Captures audio. 4 NFC Sensor Reads NFC devices/contactless smart cards. 5 Fingerprint Reader Scans the user’s fingerprint. 6 Volume Down/Up Button Decreases / Increases the volume.
CAXA0 Rugged Tablet User Manual Right View The following illustration shows the right side of the system. Number Component 1 Power Button Turns the tablet or display on/off. 2 SmartCard Reader (Optional) Reads SmartCards. Used to attach a carrying strap to the tablet. 3 10 Strap Loop NOTE: A carrying strap is not provided by the manufacturer and must be purchased separately by the user.
Tablet Overview Left View The following illustration shows the left side of the system. Number Component 1 Universal Audio Jack Connects to headphones, speakers, microphones and other audio output/input devices. 2 HDMI Port Connects to video devices such as a display, television, or projector. 3 USB 3.0 Ports Connects to USB devices. 4 DC-In Port Connects to the adapter for charging. Used to attach a carrying strap to the tablet.
CAXA0 Rugged Tablet User Manual Rear View The following illustration shows the rear side of the system. Number Component 1 Battery Compartment Cover Covers the removable battery, optional SIM card, and SD card slots. 2 Hand-Holder Slot Used to attach an optional holder to conveniently carry the tablet using a single hand. 3 Rear-Facing Camera (8MP) Captures images and videos. SIM Card Slot (Optional) Accepts a Micro-SIM card for 4G LTE mobile broadband.
Tablet Overview Top View The following illustration shows the top side of the system. Number 1 2 14 Component Barcode Scanner (Optional) Scans barcodes/QR codes. RS-232 Port Receives and transmits data from/to other computers or data devices.
CAXA0 Rugged Tablet User Manual Bottom View The following illustration shows the bottom side of the system. Number 1 Component Docking Connector Connects to the optional tablet dock.
Tablet Overview Getting Started LED Indicators The system status LEDs are located on the front of the system, they include LEDs for the following: power, and battery charging status. Power Indicator LED icon 16 LED Behavior Description Solid Blue The power is on. Off The system is in Sleep mode or is powered off.
CAXA0 Rugged Tablet User Manual Battery Charge Status Indicator When the tablet is equipped with a primary battery (main battery) and a secondary battery (bridge battery): LED icon LED Behavior Description Solid Green Both batteries are fully charged. Solid Amber Either one of the batteries is charging. Off The system is running on primary or secondary battery power.
Getting Started Charging the Tablet 1. Connect the power cord to the power adapter. 2. Connect the power adapter to the DC-In port of the tablet. 3. Plug the power supply into an electrical outlet. The battery charge LED lights amber when your tablet is getting charged. NOTE: The battery is not fully charged when you unpack your tablet. It is recommended to keep the power supply plugged in for at least 5 hours until the battery is fully charged.
CAXA0 Rugged Tablet User Manual Turning On/Off the Display Press the power button when the system is on to turn off the display and put the system in standby mode. When the system is in standby mode, press the power button once to wake up the system and turn the display on.
Getting Started Operating Your Tablet R232 Connection The RS-232 port located on the top of the tablet is an interface that allows for the transmission of data to and from the tablet and other data devices (such as a computer or infrastructurerelated equipment) for various purposes including the transfer of information or sending commands. Connections to the RS-232 port require a RS-232 cable as shown in the image below.
CAXA0 Rugged Tablet User Manual SmartCard Reader (Optional) The optional SmartCard reader located on the right side of the tablet allows for the transmission of data, mainly for identification/authentication purposes, to and from the tablet and a smart card Insert a smart card into the reader to read/process/write information from/to the smart card. Ensure that the smart card is inserted into the card slot securely in the correct orientation with the chip facing down, as shown in the image below.
Operating Your Tablet NFC Sensor The NFC sensor located on the front of the tablet allows it to interact with other NFC-enabled devices or NFC cards/tags, such as smartphones or contactless smart cards. Tap an NFC-supported device or card/tag to the NFC logo, indicating the sensor area, to activate the NFC sensor, as shown in the image below. NOTE: Additional NFC reader application/software is required for this feature.
CAXA0 Rugged Tablet User Manual Fingerprint Reader The fingerprint reader located on the front of the tablet allows for a quick, convenient and more secure way to log into the system by scanning your fingerprint instead of entering a password. Place your finger on the fingerprint sensor until your fingerprint has been scanned to activate the reader (removing your finger to fast or not pressing your finger completely on the scanner may make a scan unsuccessful), as shown in the image below.
Operating Your Tablet Barcode Scanner (Optional) The optional barcode scanner located on the top of the tablet allows the tablet to retrieve information from bar codes when the barcode scanner button is pressed. 1. Open the application/software that you want to use to read the barcode data. NOTE: The application/software is not provided by the manufacturer and must be installed separately by the user. 2. Place the scanner lens directly over the barcode at an appropriate distance. 3.
CAXA0 Rugged Tablet User Manual Entering the BIOS Menu BIOS (Basic Input / Output System) is a hardware configuration program installed in the tablet and initialized when the tablet is powered on. The BIOS is preset to optimal default settings for normal use, but in certain cases a user or technician might want to access the BIOS menu to change certain hardware settings for the tablet or to boot directly to a specific bootable device.
Operating Your Tablet Replacing the Battery Battery Removal and Replacement The primary battery is a 7.2V / 3950mAh battery installed on all models under the battery compartment cover located on the rear of the tablet, which can be removed and replaced by the user. The secondary battery, also called a bridge battery, is located internally and cannot be accessed by the user. The secondary battery is mainly used to power the tablet when the primary battery is removed.
CAXA0 Rugged Tablet User Manual 5. To insert/replace the battery reverse the steps described above NOTE: Dispose of used batteries according to the local laws and regulations of your region.
Operating Your Tablet Specifications CPU Intel® Celeron® Processor N3350 Memory* 4GB / 8GB on-board LPDDR4 Storage* 1 128GB / 256GB M.2 SSD (Type 2242) Display 10.1" 1280 x 800 (HD) pixels, 500 nits Pointing Device Gorilla® Glass III touchscreen, supports 10 finger touch, and touch for PVC/latex gloves Active Stylus (Capacitive type) support2 (The Stylus is sold separately and is not shipped with the tablet.) Communication WLAN ‒ 802.11a/b/g/n/ac + Bluetooth v4.
CAXA0 Rugged Tablet User Manual Removable main battery ‒ Li-ion, 28.44Wh, 7.2V, 3950mAh Embedded bridge battery ‒ Li-ion, 2.701Wh, 7.4V, 365mAh (for supporting hot-swapping) Battery Operating Time 8 Approximately 8 hours for a fully charged main battery Dimensions (W x D x H) 297.6mm x 206.5mm x 25.0mm (11.7 inches x 8.13 inches x 0.98 inches) Weight 1230g (2.71lbs.) Note * The specifications listed in this field denote options which the user can select for their tablet.
FCC: Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only.
La fonction de sélection de l'indicatif du pays est désactivée pour les produits commercialisés aux États-Unis et au Canada. Radiation Exposure Statement: The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual.
2) 3) 4) 5) canaux; le gain maximal d’antenne permis pour les dispositifs utilisant les bandes 5250-5350 MHz et 5470-5725 MHz doit se conformer à la limite de p.i.r.e.; le gain maximal d’antenne permis (pour les dispositifs utilisant la bande 5725-5825 MHz) doit se conformer à la limite de p.i.r.e. spécifiée pour l’exploitation point à point et non point à point, selon le cas. les pires angles d’inclinaison nécessaires pour rester conforme à l’exigence de la p.i.r.e.
