User's Manual

CAX00 Rugged Tablet User Manual
14
Battery Charge Status Indicator
When the tablet is equipped with a primary battery (main battery) and a secondary battery
(bridge battery):
LED icon
LED Behavior
Description
Solid Green
Both batteries are fully charged.
Solid Amber
Either one of the batteries is charging.
Off
The system is running on primary or secondary battery power.
NOTE: If the battery indicator is not lit even when the adapter is
properly connected and the batteries are properly installed, the
adapter's protection function may be activated. In this circumstance
disconnect the adapter and wait for 1 minute before reconnecting the
adapter.
Blinking Red
•
The primary battery level is critically low (the capacity is
below 10%). This behavior will occur regardless of whether
the secondary battery level is at full charge capacity or not.
• The battery compartment cover is not closed properly.
When the tablet is equipped with a primary battery only:
LED icon
LED Behavior
Description
Solid Green
The battery is fully charged.
Solid Amber
The battery is charging.
Off
The system is running on battery power.
NOTE: If the battery indicator is not lit even when the adapter is
properly connected and the battery is properly installed, the adapter's
protection function may be activated. In this circumstance disconnect
the adapter and wait for 1 minute before reconnecting the adapter.
Blinking Red
• The primary battery level is critically low (the capacity is
below 10%).
•
The battery compartment cover is not closed properly.