User's Manual

ManualsBrandsCompal Electronics ManualsElectronicsSmart IOT

Features & Appearance (continue)

Bottom and Rear Views

11. Rubber foot

12. Reset hole

13. MicroUSB (UART)*

14. USB 2.0*

15. DC-in power connector

16. Stand

*under the sticker

Product Brief

The Compal Jupiter II, the all-in-one Smart Assistant, is the rst

oered as a completed system for the development on audio/

image intelligence and home automation control.

It is equipped with a Intel® Atom™ processor that gives you Intel

level performance you’ve come to expect and quality you can

count on. It includes 8GB (upgradable to 16GB) of on-board

storage for programing your application.

The Jupiter II features a far-eld microphone array of 8

microphones capturing individual voice several meters away. It

hears your requests and questions from any direction across the

room. Incorporate with 2.1 channels high quality speakers giving

rich and crystal clear sound for both voice AI interaction and

streaming music.

The intelligence could be implemented on Jupiter II is not only for

Virtual Personal Assistant (VPA), but also image one. The Jupiter II

installs a wide angle camera, up to 130 degrees on horizontal

view, allowing capturing clear images or high-denition video

further image and video analytics, such as facial recognition,

behavior observation, event detection, etc.

With plenty of wirelesses, include WiFi, Bluetooth, Zigbee, and

Z-wave, you can connect with various smart home edge products,

and interact and control among dierent types of wireless edge

devices to customize your experience.

Detecting the status of surrounding is also essential for the home

automation. The Jupiter II contains six types of environmental

sensors: temperature, relative humidity, pressure, ambient light,

air quality (VOC), PIR motion, delivering diverse and full-range of

information you need for the rule setting.

The system is preinstalled with Linux Ostro. It is compatible with

Intel® Smart Home Development Acceleration Platform (SHDAP)

SDK. For the Intel SHDAP detail information, please contact

regional Intel representative.

Features & Appearance

Top and Front Views

1. Ambient sensor

2. LEDs indication ring

3. Microphone

4. Volume up/ down buttons

5. Camera

6. PIR sensor

7. Thermal holes

8. Speaker (Woofer)

9. Speaker (Tweeter)

10. Sound reection corn

Technical Specications

Processor

• Intel® Atom™ processor x5-E8000

• 2M Cache, up to 2.00 GHz

System Memory

• DDR3L 2G

• Upgradable to 8GB

Storage Capability

• 8GB eMMC soldered-down

• Upgradable to 16GB

Peripheral Connectivity

• AzureWave AW-CBN178NF Dual

Band Wireless 802.11a/b/g/n/ac,

2x2

• Bluetooth 4.2 +EDR/ BLE

• SigmaDesign Z-wave

• MMBNet Zigbee/ Zigbee Pro (2.0)

• TELIT 4G LTE Module (optional)

System BIOS

• 128M

B Flash EEPROM

Hardware Management Feature

• Voltage and temperature sensing

• ACPI-compliant power

management control

Microphone

• 6+2 microphone array

• Far eld >5m, 98%

Speaker

• 1 x Tweeter, 5W

• 1 x Woofer, 10W

Camera

• 2 Megapixel

• FOV (H): 130 degrees

Top Panel Control

• 1 x Volume Up

• 1 x Volume Down

Environmental Sensor

• 1 x 3-in-1 Temperature,

Relative Humidity, Pressure

• 1 x Ambient light

• 1 x Air quality (VOC)

• 1 x PIR motion

Expansion Capabilities

(for code development)

• 1 x MicroUSB (UART)

• 1 x USB 2.0

Mechanical Chassis Size

• 281.18 mm x Ф 95.04~106.5 mm

Pre-loaded OS

• Linux Ostro

Baseboard Power Requirements

• 12V, 24W, wall-mount AC-DC power

adapter

• EU/ US AC adapter

Environment Operating Temperature

• 0

C to +40

Storage Temperature

• -20

C to +70

Product Safety Regulations and

Standards

• EN 60950-1

EMC Regulations and Standards

• FCC Part 15

• EN 55032/55024/301489

• ICES-003

This Class B digital apparatus complies

with Canadian ICES-003.

Cet appareil numérique de la classe B est

conforme à la norme NMB-003 du Canada

Environmental Regulation

• RoHS Directive 2011/65/EU

• WEEE Directive 2012/19/EU

COMPAL

SMART ASSISTANT

Jupiter II

6+2 PCS

MIC ARRAY

10W+5W

SPEAKERS

FOV(H) 130°

CAMERA

802.11ac

WIRELESS

Bluetooth

ZIGBEE

Z-WAVE

environmental

SENSORS

Hardware Installation Instructions

1. Connect the device with power and notebook or PC.

2. The indication LEDs rings start running around 1 minutes.

After the indication LEDs running o, the system boot up

ready.

3. Use Linux command to build up your own applications.

MicroUSB

(UART)

DC-in jack Power

Notebook/ PC

Federal Communication Commission

Interference Statement

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause

undesired operation.

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that

interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment o

and on, the user is encouraged to try to correct the interference

by one of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit diﬀerent from

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for

help.

FCC Caution:

 Any changes or modications not expressly approved by the

party responsible for compliance could void the user's authority

to operate this equipment.

 This transmitter must not be co-located or operating in

conjunction with any other antenna or transmitter.

FOR MOBILE DEVICE USAGE (>20cm)

Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set

forth for an uncontrolled environment. This equipment should be

installed and operated with minimum distance 20cm between the

radiator & your body.

FOR COUNTRY CODE SELECTION USAGE (WLAN DEVICES)

Note: The country code selection is for non-US model only and is

not available to all US model. Per FCC regulation, all WiFi product

marketed in US must xed to US operation channels only.

Summary of content (2 pages)

PAGE 1
COMPAL SMART ASSISTANT Jupiter II Product Brief The Compal Jupiter II, the all-in-one Smart Assistant, is the first offered as a completed system for the development on audio/ image intelligence and home automation control. It is equipped with a Intel® Atom™ processor that gives you Intel level performance you’ve come to expect and quality you can count on. It includes 8GB (upgradable to 16GB) of on-board storage for programing your application.
PAGE 2
FOR MOBILE DEVICE USAGE (>20cm) Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. FOR COUNTRY CODE SELECTION USAGE (WLAN DEVICES) Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only.