User Manual

16 Basic Operations
Basic Operations
Switching ON/OFF
To Switch ON/OFF the phone, the phone body must be opened.
1. Press and hold
D(Power) for 2 to 3 seconds
2. Startup animation will start
3. Customizable Greeting (see “Greeting” on page 34) will be displayed for
2 seconds
4. The display will be stayed in Idle screen
Making a Call
Ensure the phone body is opened, the phone is switched on and the signal
strength meter shows network coverage is available in the current area.
Entering numbers
You need to have the area code and the phone
number before you call.
In idle screen
1. Enter the area code and phone number # -
,
2. The dialled number is displayed
3. Press
C(Call)
Ending a call
When you end a call, the duration of the call will be displayed. If the Max Cost
(see page xx) is setted, the remaining units will be displayed also.
While on a call
1. Press
D(End)
2. Duration is displayed
3. Max Cost is displayed (when setted)
see max cost