Notes K-10 Conic Fresh K- 8 Fresh Instructions Manual K-10 Conic Fresh K-8 Fresh molinos de café moulins à café kaffeemühlen macinadosatori
Index 1 - Description 2 - Technical characteristics 3 - Identification 1 Description ORIGINAL INSTRUCTIONS Congratulations. You have just acquired one of the most state-of-the art coffee grinders on the market today. We appreciate your patronage and sincerely hope that you enjoy the product. The Fresh line of grinders is designed to grind roasted coffee beans on demand, in order to obtain the freshest, high quality coffee possible.
2 Technical characteristics 3 Identification The Fresh line of grinders is available in single phase, with a choice of 110V or 220V-240V, depending on local requirements. Further electrical/ technical specifications are as follow: K-8 Fresh K-10 Conic Fresh 110 v 60 hz 280w/150w 1030 rpm 680w/370w 265 rpm 220 v 60 hz 420w/198w 1600 rpm 825w/430w 375 rpm 230 v 50 hz 400w/200w 1300 rpm 800w/450w 325 rpm 240 v 50 hz 435w/210w 1350 rpm 850w/460w 311 rpm Production 7 gr.
External Features 5 Installation All models in the Fresh line of grinders share the following external features, independent of burr size, voltage or model. 1 Hopper lid 2 Hopper Bean trap 3 lever 4 Hopper security screw 6 Main display Configuration 7 buttons Grind adjustment 5 knob 8 Refill button 9 Exit chute Fork adjustment 13 screw Dosis button 11 3 position 15 switch ORIGINAL INSTRUCTIONS The grinder should rest on a flat, hard surface in close proximity to the coffee machine.
7 Functions 6 Adjustments Portafilter Forks – Loosen the two adjustment screws (13), found on each side of the upper portafilter fork (10), and slide downward on the adjustable lower portafilter fork (12) until the appropriate space remains to accommodate operator’s specific portafilter(Fig. 2). Once proper portafilter spacing adjustment is reached, retighten the two adjustment screws (13).
ORIGINAL INSTRUCTIONS 7.1. Automatic Mode In this mode, user should press/release the dosis button (11) once for a single dosis and twice for a double dosis. The display screen (6) will indicate an icon representing either a single or double dose, along with the programmed time of the dose counting down from total dose time to zero. Also, once the dose cycle has been activated, the dosis button (11) can be pressed/released, to suspend the cycle.
ORIGINAL INSTRUCTIONS To modify the time of a single dose, press the configuration button (7) corresponding to a single dose (single cup icon). On the main display (6) the icon for a single dose will appear for 5 seconds, along with the programmed time for a single dose.
9 Cleaning 9.1. General cleaning To guarantee the correct operation of the machine as well as the quality of the ground coffee, we should periodically clean the parts that come into contact with the coffee (at least once a week). Before performing any type of maintenance work, the following indications must be taken into consideration: • Always turn off the machine using the 3 position switch (15). • Disconnect the machine from the power supply. • Do not submerge the machine in water or use waterjet.
10 Maintenance 11 Safety Measures 9.1 General warnings Before performing any type of maintenance work, the following indications should be taken into consideration: • Always turn off the machine using the 3 position switch (15). • If a blockage occurs, please contact your sales representative. • Disconnect the machine from the power supply. In the event of a breakdown or malfunction, turn the machine off. Do not try to repair it or intervene directly. Please call your local technical service.
12 Declaration of EC Conformity In accordance with European community directives, quality certificates have been applied. All materials have been adapted and technical reports are available at our offices. 06/95/EC of 12/12/2006 on the harmonization of the laws of the Member States relating to electrical equipment designed for use within certain voltage limits. 04/108/EC on the approximation of the laws of the Member States relating to electromagnetic compatibility.
