User manual

4
ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v. 20/03/2015 | K06315
5. TECHNICAL CHARACTERISTICS
5.1.Usage
The coffee grinders are intended for use on commercial premises and facilities where
ground coffee is required, or in small stores that sell coffee. The grinder must only be
used to grind coffee beans. Any use other than this will be considered improper and
dangerous.
NOTE: The manufacturer will not be held responsible for any damages resulting from
improper use of the equipment, or for not following the safety measures as outlined
below.
5.2.Technicaldata
Model
100V
50Hz
100V
60Hz
110V
60Hz
220V
60Hz
230V
50Hz
240V
50Hz
400
Vψ
50Hz
208V
60Hz
F10
MASTER
CONIC
OD
Electrical
power
850 1.000 935 930 950 975 780 840 (W)
Spin
speed
326 378 325 388 340 345 350 390 rpm
F10
CONIC
OD
Electrical
power
890 960 810 810 800 850 780 840 (W)
Spin
speed
335 388 400 375 325 331 350 390 rpm
F8
OD
Electrical
power
750 810 860 735 730 840 (W)
Spin
speed
1.250 1.540 1.600 1.600 1.325 1.330 rpm