User manual

K06315 | v. 20/03/2015 | Ref. quality process 002/03 | ORIGINAL INSTRUCTIONS

9.2.Utilization

Through the program menu (Fig. 4), it is possible to select two distinct functional

modes: AUTOMATIC MODE, PRESLECT MODE and MANUAL MODE.

9.3.Automaticmode

In this mode, user should press/release the appropriate numeric LCD icon ( )

once for a single dosis, twice for a double dosis and three times por a triple dosis.

The display screen ( ) will indicate an icon representing either a single, double

or triple* dose, along with the programmed time of the dose counting down from

totaldosetimetozero.

Also, once the dose cycle has been activated, the dosis button ( ) can be pressed/

released, to suspend the cycle. If the dose pulse button is pressed/released again,

within 8 seconds, the cycle will continue from the point at which it was suspended. If

more than 8 seconds pass, the dose cycle will start a new, complete dose cycle.

Pausing the grind cycle can be done by selecting MENU / SETTINGS CONFIGURATION

/ GRIND PAUSE SET UP.

* (only for models with possibility to offer three doses).