USER MANUAL Diamond Display FCC ID: 2AQHSF0210007 www.comodule.
Introduction The COMODULE Diamond Display is designed to be connected via Bluetooth to a mobile phone to gather and transmit data and to be controlled remotely. It thus creates opportunities for the physical world to be digitalized, which results in improved efficiency, accuracy and economic benefits. This manual is intended for Diamond Display integration for Bike manufacturers. www.comodule.
Installation For the installation, the following equipment is needed: • COMODULE Diamond Display • Bolt for installation (come with COMODULE device) • Compatible electric bike Installing the modules on the scooters • 1. Plug the Diamond Display cable to the designated cable on the electric vehicle • 2. Attach the Diamond Display to the handlebar by using the existing screw • 3. Turn on the bike and the Diamond Display (Automatic) • 4.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Interference INSTRUCTION TO THE USER: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules.
interference to radio and TV reception. The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the user's authority to operate this equipment. www.comodule.
