Update:11.07.2022 USER MANUAL Diamond Display FCC ID: 2AQHS-DMD3X IC: 25027-DMD3X www.comodule.
Update:11.07.2022 Introduction The COMODULE Diamond Display is designed to be connected via Bluetooth to a mobile phone to gather and transmit data and to be controlled remotely. It thus creates opportunities for the physical world to be digitalized, which results in improved efficiency, accuracy and economic benefits. This manual is intended for Diamond Display integration for Bike manufacturers. www.comodule.
Update:11.07.2022 Installation For the installation, the following equipment is needed: ● COMODULE Diamond Display ● Bolt for installation (come with COMODULE device) ● Compatible electric bike Installing the modules on the scooters ● 1. Plug the Diamond Display cable to the designated cable on the electric vehicle ● 2. Attach the Diamond Display to the handlebar by using the existing screw ● 3. Turn on the bike and the Diamond Display (Automatic) ● 4.
Update:11.07.2022 Legal FCC This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. ISED This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Update:11.07.2022 (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Interference INSTRUCTION TO THE USER: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Update:11.07.2022 www.comodule.
