Master V10 IoT module user manual
Introduction The COMODULE IoT device is designed to be connected wirelessly into existing network infrastructure to gather and transmit data and to be controlled remotely. It thus creates opportunities for the physical world to be digitalized, which results in improved efficiency, accuracy and economic benefits. This manual is intended for electric bike manufacturers for COMODULE IoT module integration. This device complies with part 15 of the FCC Rules.
1 Electrical Specification Power management ● Input from Fazua R60 bike system 12VDC 500mA ● Single-cell battery management (≤ 4.2V; charge ≤0.8A; discharge protection circuit) Bluetooth / ANT+ ● Bluetooth Low Energy 5.
● Digital configurable output for peripheral devices: 5/8/12VDC (4.8W) ● HV output (input voltage output) to provide main battery power to 3rd party devices Connector type Higo Mini F male Z809FG Environmental restrictions ● Storage temperature -20 to 45°C (90 days) ● Operating temperatures: ○ charge 0 to +45°C ○ discharge -20 to 60°C Backup Battery ● Rated capacity 2500 mAh ● Nominal voltage 3.
2 Mechanical Specification Casing material PA6+15%GF Surface finish VDI24 Colour Black Size 87X31x26mm (1012 casing w/o fixation points) IP Class IP 66 (when mated) 3 IoT module installation on the bike Place the module behind the motor into the motor cover in a way that the potted surface will stay towards the motor and cable outlet on the chainwheel side. Connect Higo Mini F male Z809FG connector to dedicated cable from bike drivetrain (defined by bike manufacturer).
4 Wiring specification Connector Higo Mini F male Z809FG Cable length 100 mm +-5mm Pinout Pin no.
5 Communication The Product communicates with the following peripherals : Peripheral Fazua Ride 60 Drivetrain Ilockit external lock Buzzer control
